Essentra Pty Ltd is a limited by shares, Australian proprietary company. This corporation was registered on 1967-09-04 and was issued with the 000591168 ACN. Its Australian Business Number is 29000591168. Since 2015-07-10, the company is headquartered in NSW, post code 2164. The previous headquarters were located in NSW 2116 (from 2014-09-21 to 2015-07-10), NSW 2116 (from 2014-01-10 to 2014-09-21), and NSW 2116 (from 2000-03-17 to 2014-01-10). Essentra Pty Ltd was registered for the GST on 2000-07-01. The company has also used 3 business names, namely Specialty Plastics from 2015-03-04 to 2018-07-12, Specialty Plastics from 2015-03-03 to 2018-07-05. The above data comes from the ABN database which was updated on 2018-09-03. AUBiz found 5 trademarks that mention this company. Trademark number 732785 was filed on 1997-04-22 and is categorised as "composite" (application status: "registered, live"). Other company trademarks include trademark number 732787 registered on 1997-04-22 in the "word series" category (application status/date: "registered, live", 1997-04-22); and trademark number 732789 registered on 1997-04-22 in the "word" category (application status/date: "removed, live", 1997-04-22).
| Status | From | To |
|---|---|---|
| Active | 2000-03-17 | current |
| Name | From | To |
|---|---|---|
| Essentra Pty Ltd | 2015-02-17 | current |
| Kelvindale Products Pty Ltd | 2000-05-30 | 2015-02-17 |
| Kelvindale Products Pty Ltd. | 2000-03-17 | 2000-05-30 |
| Name | From | To |
|---|---|---|
| Specialty Plastics | 2015-03-04 | 2018-07-12 |
| Specialty Plastics | 2015-03-03 | current |
| Kelvindale Products | 2015-02-19 | 2018-07-05 |
| Location | From | To |
|---|---|---|
| NSW 2164 | 2015-07-10 | current |
| NSW 2116 | 2014-09-21 | 2015-07-10 |
| NSW 2116 | 2014-01-10 | 2014-09-21 |
| NSW 2116 | 2000-03-17 | 2014-01-10 |
| Status | From | To |
|---|---|---|
| Registered | 2000-07-01 | current |
Advertisements
| Status | registered |
| Registration date | 2015-03-04 |
| Renewal date | 2018-03-04 |
| Address for service of documents | 503-505 Victoria St Wetherill Park NSW 2164 |
| Principal place of business | 503-505 Victoria St Wetherill Park NSW 2164 |
| Debtor representative | not applicable |
| Notified successor | not applicable |
| Status | registered |
| Registration date | 2015-02-19 |
| Renewal date | 2018-02-19 |
| Address for service of documents | 503-505 Victoria St Wetherill Park NSW 2164 |
| Principal place of business | 503-505 Victoria St Wetherill Park NSW 2164 |
| Debtor representative | not applicable |
| Notified successor | not applicable |
Advertisements
| Application date: | 1997-04-22 |
| Lodgement date: | 1997-04-22 |
| Registered date: | 1997-04-22 |
| Live or dead: | Live |
| CPI status: | Registered |
| Status: | Registered/Protected |
| Mark code: | Trade Mark |
| Trademark type: | Composite |
| Acceptance due date: | 1997-11-17 |
| Sealing due date: | 1998-03-20 |
| Registered from date: | 1997-04-22 |
| Sealing date: | 1998-03-20 |
| Renewal due date: | 2017-04-22 |
| Court orders: | No |
| Revocation of the acceptance: | No |
| Goods and services assistance: | No |
| Lodgement type: | National |
| Descriptive: | K |
| Device phrases: | Ltr K With Cap |
| Examination report number: | 1 |
| Examination class count: | 1 |
| NICE class code: | 20 |
| NICE occ number: | 1 |
| NICE description text: | Plugs, Caps, Stoppers, Seals, Not Of Metals; Caps And Plugs Made Of Plastics Materials |
| Suburb name: | Rydalmere |
| Postcode: | 2116 |
| Australian state code: | NSW |
| Country code: | AU |
| Attorney code: | 437219 |
| Agency code: | 1T |
| Transaction type: | Address for service of the trademark |
| Suburb name: | Sydney |
| Postcode: | 2000 |
| Australian state codee: | NSW |
| Attorney type: | Attorney |
| Country code: | AU |
| Application date: | 1997-04-22 |
| Lodgement date: | 1997-04-22 |
| Registered date: | 1997-04-22 |
| Live or dead: | Live |
| CPI status: | Registered |
| Status: | Registered/Protected |
| Mark code: | Trade Mark |
| Trademark type: | Word series |
| Acceptance due date: | 1997-08-04 |
| Sealing due date: | 1998-01-08 |
| Registered from date: | 1997-04-22 |
| Sealing date: | 1998-01-08 |
| Renewal due date: | 2017-04-22 |
| Court orders: | No |
| Revocation of the acceptance: | No |
| Goods and services assistance: | No |
| Lodgement type: | National |
| Descriptive: | Kelvindale Kelvindale Products |
| Examination report number: | 1 |
| Examination class count: | 1 |
| NICE class code: | 20 |
| NICE occ number: | 1 |
| NICE description text: | Plugs, Caps, Stoppers, Seals, Not Of Metals; Caps And Plugs Made Of Plastics Materials |
| Suburb name: | Rydalmere |
| Postcode: | 2116 |
| Australian state code: | NSW |
| Country code: | AU |
| Attorney code: | 437219 |
| Agency code: | 1T |
| Transaction type: | Address for service of the trademark |
| Suburb name: | Sydney |
| Postcode: | 2000 |
| Australian state codee: | NSW |
| Attorney type: | Attorney |
| Country code: | AU |
| Application date: | 1997-04-22 |
| Lodgement date: | 1997-04-22 |
| Registered date: | 1997-04-22 |
| Live or dead: | Live |
| CPI status: | Removed |
| Status: | Removed - Not Renewed |
| Mark code: | Trade Mark |
| Trademark type: | Word |
| Acceptance due date: | 1997-08-27 |
| Sealing due date: | 1998-01-08 |
| Registered from date: | 1997-04-22 |
| Sealing date: | 1998-01-08 |
| Renewal due date: | 2007-04-22 |
| Court orders: | No |
| Revocation of the acceptance: | No |
| Goods and services assistance: | No |
| Lodgement type: | National |
| Descriptive: | Caplugs |
| Examination report number: | 1 |
| Examination class count: | 1 |
| NICE class code: | 20 |
| NICE occ number: | 1 |
| NICE description text: | Plugs, Caps, Stoppers, Seals, Not Of Metals; Caps And Plugs Made Of Plastics Materials |
| Suburb name: | Rydalmere |
| Postcode: | 2116 |
| Australian state code: | NSW |
| Country code: | AU |
| Attorney code: | 437219 |
| Agency code: | 1T |
| Transaction type: | Address for service of the trademark |
| Suburb name: | Sydney |
| Postcode: | 2000 |
| Australian state codee: | NSW |
| Attorney type: | Attorney |
| Country code: | AU |
General information:
| Patent status: |
Lapsed Either the application has not been accepted by 21 months after the first examination report (or 12 months after the Raising the Bar Act) or some other deadline in the prosecution process has not been completed in time, for example IP Australia has issued a direction to file a request for examination and the applicant has not done so in the required period (2 months). |
| Patent type: | STANDARD |
International Patent Classification:
| IPC Mark: | E04H 17/22 |
| Section code: | E - fixed constructions |
| Class code: | 4 - building |
| Subclass code: | H - buildings or like structures for particular purposes; swimming or splash baths or pools; masts; fencing; tents or canopies, in general (foundations e02d) |
| Main group code: | 17 - fencing, e.g. fences, enclosures, corrals (features peculiar to electrified fences a01k0003000000, h05c; means for allowing passage through fences, barriers, or the like e06b0011000000) |
| Subgroup code: | 22 - anchoring means therefor, e.g. specially-shaped parts entering the ground; struts or the like (for towers or masts e04h0012200000; sockets for posts e04h0012220000) |
IP Australia process information:
| Expiry date: | 2025-09-30 |
General information:
| Patent status: |
Expired Has run to the end of its lifespan (usually 20 years after filing, but can be longer for pharmaceutical or similar patents). |
| Patent type: | INNOVATION |
International Patent Classification:
| IPC Mark: | B28B 7/18 |
| Section code: | B - performing operationstransporting |
| Class code: | 28 - working cement, clay, or stone |
| Subclass code: | B - shaping clay or other ceramic compositions, slag or mixtures containing cementitious material, e.g. plaster (foundry moulding b22c; working stone or stone-like material b28d; shaping of substances in a plastic state, in general b29c; making layered products not composed wholly of these substances b32b; shaping in situ, see the relevant classes of section e); |
| Main group code: | 7 - moulds; cores; mandrels (specially adapted for the production of tubular articles b28b0021000000) |
| Subgroup code: | 18 - the holes passing completely through the article |
IP Australia process information:
| Expiry date: | 2010-10-30 |
General information:
| Patent status: |
Ceased The granted patent was not renewed. |
| Patent type: | INNOVATION |
International Patent Classification:
| IPC Mark: | E04H 17/22 |
| Section code: | E - fixed constructions |
| Class code: | 4 - building |
| Subclass code: | H - buildings or like structures for particular purposes; swimming or splash baths or pools; masts; fencing; tents or canopies, in general (foundations e02d) |
| Main group code: | 17 - fencing, e.g. fences, enclosures, corrals (features peculiar to electrified fences a01k0003000000, h05c; means for allowing passage through fences, barriers, or the like e06b0011000000) |
| Subgroup code: | 22 - anchoring means therefor, e.g. specially-shaped parts entering the ground; struts or the like (for towers or masts e04h0012200000; sockets for posts e04h0012220000) |
IP Australia process information:
| Expiry date: | 2013-09-30 |
Contains public sector information licensed under the Creative Commons Attribution 3.0 Australia licence. Material on this website was obtained from publicly-accessible databases and is attributed to ©Commonwealth of Australia 2024 (http://data.gov.au, http://acnc.gov.au/ and http://abr.business.gov.au/), ©Intellectual Property Government Open Data 2024, ©ASIC - Company Register. While we try to make the information as precise and up-to-date as possible, we are aware the datasets are not always error-free. Aubiz.net will not take responsibility for any errors in the databases. The material provided should be treated as a starting point of more in-depth research, not as fact.