Cutting Edge Technology Pty Ltd is a limited by shares, Australian proprietary company. This corporation was registered on 1995-10-24 and was issued with the 071550911 ACN. Its Australian Business Number is 53071550911. Since 2019-10-23, the company is headquartered in QLD, post code 4068. The previous headquarters were located in QLD 4068 (from 2015-10-08 to 2019-10-23), QLD 4068 (from 2014-09-16 to 2015-10-08), and QLD 4068 (from 2011-10-04 to 2014-09-16). Cutting Edge Technology Pty Ltd was registered for the GST on 2000-07-01, up until 2020-06-30. The company has also used 1 business name, namely C E T from 2000-02-25 to 2019-04-18. The above data comes from the ABN database which was updated on 2020-11-27.
Status | From | To |
---|---|---|
Cancelled | Friday 27th November 2020 | current |
Active | Friday 25th February 2000 | Friday 27th November 2020 |
Name | From | To |
---|---|---|
Cutting Edge Technology Pty. Ltd. | Tuesday 30th May 2000 | current |
Cutting Edge Technology Pty Ltd | Friday 25th February 2000 | Tuesday 30th May 2000 |
Name | From | To |
---|---|---|
C E T | Friday 25th February 2000 | Thursday 18th April 2019 |
Location | From | To |
---|---|---|
QLD 4068 | Wednesday 23rd October 2019 | current |
QLD 4068 | Thursday 8th October 2015 | Wednesday 23rd October 2019 |
QLD 4068 | Tuesday 16th September 2014 | Thursday 8th October 2015 |
QLD 4068 | Tuesday 4th October 2011 | Tuesday 16th September 2014 |
QLD 4069 | Monday 13th December 2004 | Tuesday 4th October 2011 |
QLD 4069 | Friday 25th February 2000 | Monday 13th December 2004 |
Status | From | To |
---|---|---|
Registered | Saturday 1st July 2000 | Tuesday 30th June 2020 |
Advertisements
Status | registered |
Registration date | Monday 4th December 1995 |
Renewal date | Tuesday 4th December 2018 |
Address for service of documents | Level 4 179 Grey St South Brisbane QLD 4101 |
Principal place of business | Level 1 42 Morrow St Taringa QLD 4068 |
Debtor representative | not applicable |
Notified successor | not applicable |
Former identifier | BN5922550 |
Former state territory | QLD |
Advertisements
International Patent Classification:
IPC Mark: | E21C 25/68 |
Section code: | E - fixed constructions |
Class code: | 21 - earth or rock drilling; mining |
Subclass code: | C - mining or quarrying |
Main group code: | 25 - cutting machines, i.e. for making slits approximately parallel or perpendicular to the seam (dislodging machines with slitting means e21c0027020000, e21c0027100000, e21c0027180000) |
Subgroup code: | 68 - machines for making slits combined with equipment for removing, e.g. by loading, material won by other means (slitting machines combined with planing means e21c0027180000; removing chippings e21c0035200000) |
IP Australia process information:
Expiry date: | Sunday 23rd January 2022 |
International Patent Classification:
IPC Mark: | E21C 35/04 |
Section code: | E - fixed constructions |
Class code: | 21 - earth or rock drilling; mining |
Subclass code: | C - mining or quarrying |
Main group code: | 35 - details of, or accessories for, machines for slitting or completely freeing the mineral from the seam, not provided for in groups ; e21c0025000000-e21c0033000000, e21c0037000000; or e21c0039000000 |
Subgroup code: | 4 - safety devices (operating in the event of breakage of a haulage cable or chain e21c0029200000) |
IP Australia process information:
Expiry date: | Saturday 28th September 2019 |
General information:
Patent status: |
Lapsed Either the application has not been accepted by 21 months after the first examination report (or 12 months after the Raising the Bar Act) or some other deadline in the prosecution process has not been completed in time, for example IP Australia has issued a direction to file a request for examination and the applicant has not done so in the required period (2 months). |
Patent type: | STANDARD |
International Patent Classification:
IPC Mark: | E21D 20/02 |
Section code: | E - fixed constructions |
Class code: | 21 - earth or rock drilling; mining |
Subclass code: | D - shafts; tunnels; galleries; large underground chambers (soil-conditioning or soil-stabilising materials c09k0017000000; cutting machines for mining or quarrying e21c; safety devices, transport, rescue, ventilation or drainage e21f) |
Main group code: | 20 - setting anchoring-bolts (anchoring bolts for shafts, tunnels or galleries e21d0021000000; means for anchoring structural elements or bulkheads specially adapted to foundation engineering e02d0005740000; dowels or other devices fastened in walls or the like by inserting them in holes made therein for that purpose f16b0013000000) |
Subgroup code: | 2 - with provisions for grouting |
IP Australia process information:
Expiry date: | Saturday 29th August 2026 |
Contains public sector information licensed under the Creative Commons Attribution 3.0 Australia licence. Material on this website was obtained from publicly-accessible databases and is attributed to ©Commonwealth of Australia 2024 (http://data.gov.au, http://acnc.gov.au/ and http://abr.business.gov.au/), ©Intellectual Property Government Open Data 2024, ©ASIC - Company Register. While we try to make the information as precise and up-to-date as possible, we are aware the datasets are not always error-free. Aubiz.net will not take responsibility for any errors in the databases. The material provided should be treated as a starting point of more in-depth research, not as fact.