Name in the ASICs register: Connolly Key Joint Pty. Ltd.
Australian Company Number: 003175979
Australian Business Number: 36003175979
Registration date: October 2, 1986
Type: Australian proprietary company
Class: Limited by Shares
Subclass: Proprietary other
last updated
Description
Connolly Key Joint Pty Ltd is a limited by shares Australian proprietary company. Located at NSW 2470 since 2000-02-06 the company is, as the updated on 2000-07-01 ABN database shows, registered. The company has been registered for Goods & Services Tax since 2000-07-01. Known company numbers for Connolly Key Joint Pty Ltd are as follows: ACN - 003175979, Australian Business Number - 36003175979. Connolly Key Joint Pty. Ltd. has been the company name since 1989-02-14. Their official company name changed on 2000-02-06 to Connolly Key Joint Pty Limited. The company had used this name up until 2000-05-30. We found 3 trademarks that reference this company. 1997-05-28 is the date the documents needed to start the registration process of trademark no 735532 were submitted. This trademark is categorised as "word" and its application status is "registered, live". Other company trademarks include trademark number 735533, application status "registered, live", registered on 1997-05-28 in the "fancy" category;trademark number 1000772, application status: "registered, live" registered on 2004-05-05 in the "composite" category.
Details for ABN 36003175979
Type: Australian Private Company
ABN Status
Status
From
To
Active
February 6, 2000
current
Main Name
Name
From
To
Connolly Key Joint Pty. Ltd.
May 30, 2000
current
Connolly Key Joint Pty Limited
February 6, 2000
May 30, 2000
Main Location
Location
From
To
NSW 2470
February 6, 2000
current
Goods & Services Tax (GST)
Status
From
To
Registered
July 1, 2000
current
Advertisements
Company Trademarks
Trademark number: 735532
General information:
Application date:
May 28, 1997
Lodgement date:
May 28, 1997
Registered date:
May 28, 1997
Live or dead:
Live
CPI status:
Registered
Status:
Registered/Protected
Mark code:
Trade Mark
Trademark type:
Word
Acceptance due date:
September 25, 1997
Sealing due date:
January 23, 1998
Registered from date:
May 28, 1997
Sealing date:
January 23, 1998
Renewal due date:
May 28, 2017
Court orders:
No
Revocation of the acceptance:
No
Goods and services assistance:
No
Lodgement type:
National
Descriptive:
Ckj
Examination report number:
1
Examination class count:
1
NICE class code:
6
NICE occ number:
1
NICE description text:
Metal Building Products, Including Key Joint Plates, Metal Fixings And Components Therefor
Applicant information:
Suburb name:
Casino
Postcode:
2470
Australian state code:
NSW
Country code:
AU
Attorney information:
Attorney code:
432330
Agency code:
FK
Transaction type:
Address for service of the trademark
Suburb name:
Brisbane
Postcode:
4001
Australian state codee:
QLD
Attorney type:
Attorney
Country code:
AU
Trademark number: 735533
General information:
Application date:
May 28, 1997
Lodgement date:
May 28, 1997
Registered date:
May 28, 1997
Live or dead:
Live
CPI status:
Registered
Status:
Registered/Protected
Mark code:
Trade Mark
Trademark type:
Fancy
Acceptance due date:
January 29, 1998
Sealing due date:
May 29, 1998
Registered from date:
May 28, 1997
Sealing date:
May 29, 1998
Renewal due date:
May 28, 2017
Court orders:
No
Revocation of the acceptance:
No
Goods and services assistance:
No
Lodgement type:
National
Descriptive:
Connolly
Examination report number:
1
Examination class count:
1
NICE class code:
6
NICE occ number:
1
NICE description text:
Key Joint Plates, And Metal Fixings And Components For Use Therewith
Applicant information:
Suburb name:
Casino
Postcode:
2470
Australian state code:
NSW
Country code:
AU
Attorney information:
Attorney code:
432330
Agency code:
FK
Transaction type:
Address for service of the trademark
Suburb name:
Brisbane
Postcode:
4001
Australian state codee:
QLD
Attorney type:
Attorney
Country code:
AU
Trademark number: 1000772
General information:
Application date:
May 5, 2004
Lodgement date:
May 5, 2004
Registered date:
May 5, 2004
Live or dead:
Live
CPI status:
Registered
Status:
Registered/Protected
Mark code:
Trade Mark
Trademark type:
Composite
Acceptance due date:
August 25, 2004
Sealing due date:
March 9, 2005
Registered from date:
May 5, 2004
Sealing date:
December 20, 2004
Renewal due date:
May 5, 2024
Court orders:
No
Revocation of the acceptance:
No
Goods and services assistance:
No
Lodgement type:
National
Descriptive:
Connolly
Device phrases:
Word In Girder
Examination report number:
1
Examination class count:
2
NICE class code:
19
NICE occ number:
1
NICE description text:
Non-metallic Building Products, Including: Capping And Strips For Key Joint Plates, Expansion Joint Plates, Contraction Joint Plates, Rebate Moulds, Crack Inducers And Formwork For Concrete; Joint Filler Strips For Concrete; Dowel Sleeves And Dowel Caps; Reinforcing Bar And Rod Stabilizers; Casting Formers And Formwork For Concrete; Plastics Fixings For The Aforesaid Goods
Applicant information:
Suburb name:
Casino
Postcode:
2470
Australian state code:
NSW
Country code:
AU
Attorney information:
Attorney code:
432330
Agency code:
FK
Transaction type:
Address for service of the trademark
Suburb name:
Brisbane
Postcode:
4001
Australian state codee:
QLD
Attorney type:
Attorney
Country code:
AU
Company Patents
Patent Application Number: 2003200539
General information:
Application date:
February 17, 2003
Patent status:
Sealed
What happens 3 months after acceptance, assuming there are no oppositions filed. The Status 'sealed' was replaced with 'granted' with IP reform implementation, but from a systems perspective the two statuses are identical.
Patent type:
STANDARD
Primary IPC mark:
E04G 21/32
Accepted claims count:
10
International Patent Classification:
IPC Mark:
E04C 5/16
Version date of the IPC Classification record:
January 1, 2006
Section code:
E
- fixed constructions
Class code:
4
- building
Subclass code:
C
- structural elements; building materials (for bridges e01d; specially designed for insulation or other protection e04b; elements used as building aids e04g; for mining e21; for tunnels e21d; structural elements with broader range of application than for building engineering f16, particularly f16s)
Main group code:
5
- reinforcing elements, e.g. for concrete; auxiliary elements therefor (material composition c21, c22; arrangements of reinforcing elements, see the relevant classes);
Subgroup code:
16
- auxiliary parts for reinforcements, e.g. connectors, spacers, stirrups (tools for connecting reinforcing elements e04g0021120000)
The specification prior to acceptance and where the application has not lapsed
Patent type:
STANDARD
Primary IPC mark:
E01C 11/14
International Patent Classification:
IPC Mark:
E01C 11/14
Version date of the IPC Classification record:
January 1, 2006
Section code:
E
- fixed constructions
Class code:
1
- construction of roads, railways, or bridges
Subclass code:
C
- construction of, or surfaces for, roads, sports grounds, or the like; machines or auxiliary tools for construction or repair (forming road or like surfaces by compacting or grading snow or ice e01h)
Has run to the end of its lifespan (usually 20 years after filing, but can be longer for pharmaceutical or similar patents).
Patent type:
INNOVATION
Primary IPC mark:
E04B 1/48
IP certified sealed or certified as a result of an examination date:
August 15, 2007
Certitification publish date:
August 30, 2007
Certitification date:
September 2, 2007
Accepted claims count:
4
International Patent Classification:
IPC Mark:
E04B 1/41
Version date of the IPC Classification record:
January 1, 2006
Section code:
E
- fixed constructions
Class code:
4
- building
Subclass code:
B
- general building constructions; walls, e.g. partitions; roofs; floors; ceilings; insulation or other protection of buildings (border constructions of openings in walls, floors, or ceilings e06b0001000000)
Main group code:
1
- constructions in general; structures which are not restricted either to walls, e.g. partitions, or floors or ceilings or roofs (scaffolds, shutterings e04g; structures specially adapted for buildings for special purposes, general layout of buildings, e.g. modular co-ordination, e04h; the particular parts of buildings, see the relevant groups for those parts);
Subgroup code:
41
- connecting devices specially adapted for embedding in concrete or masonry (spacers for cavity walls e04b0002300000, e04b0002440000; connectors for reinforcing elements e04c0005160000; fastening frames to the border of openings e06b0001560000)